Journal of Materials Research and Technology Journal of Materials Research and Technology
J Mater Res Technol 2017;6:241-50 DOI: 10.1016/j.jmrt.2017.04.002
Original Article
Friction and wear behaviour of tool steels sliding against 22MnB5 steel
Elena Gracia-Escosa, Ignacio García, Juan J. de Damborenea, Ana Conde,
Departamento de Ingeniería de Superficies, Corrosión y Durabilidad, Centro Nacional de Investigaciones Metalúrgicas (CENIM-CSIC), Madrid, Spain
Received 11 January 2017, Accepted 04 April 2017

Boron steels are used in hot stamping process due to their good mechanical properties. During the stamping process, the dies are exposed to aggressive conditions including adhesive wear, abrasion, thermal stresses and fatigue. In the present work, QRO 90 and UNIMAX slid against 22MnB5 steel in four conditions: with and without hardening treatment and, with and without Al–10%Si coating, in order to evaluate the influence of both coating and austenitization treatment on friction and wear of tool steels. The results showed that Al–10%Si reduces the friction coefficient, while the hardening treatment results in an increase of COF due to Fe2Al5 brittle compounds. Wear mechanism of both tool steels is adhesive and oxidative when tested against coated and uncoated 22MnB5, respectively.

Friction, 22MnB5, Adhesion, Al–Si coating, Tool steels
J Mater Res Technol 2017;6:241-50 DOI: 10.1016/j.jmrt.2017.04.002
Cookies Policy
To improve our services and products, we use cookies (own or third parties authorized) to show advertising related to client preferences through the analyses of navigation customer behavior. Continuing navigation will be considered as acceptance of this use. You can change the settings or obtain more information by clicking here.